Description
NANOSKIN AUTOSCRUB 6" Foam Pad
• Lasts up to 4 times longer than clay bars
• For a flawless “show room perfect” shine
• Glides on & off easily for a slick finish
• If inadvertently dropped on shop floor, simply rinse clean
There is a significant difference between NANOSKIN AUTOSCRUB and clay bars. An outstanding machine/advanced polymer combination makes AUTOSCRUB the best contamination removal tool ever.
Compare with clay bars:
|
AUTOSCRUB Pad |
Traditional Clay Bars |
Application Tool |
Hand or Orbital Polisher |
Hand |
Durability |
50~80 times |
10~15 times |
Washable |
Yes |
No |
Temp. Sensitivity |
Low to Medium |
Medium to High |
Use with Lubricant |
Yes |
Yes |
Overspray |
Fast to remove |
Slow to remove |
Brake Dust |
Fast to remove |
Slow to remove |
Rail Dust |
Fast to remove |
Hard to remove |
Industrial Pollution |
Fast to remove |
Slow to remove |
Reshape |
Not required |
Required |
Directions:
Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface below 55°F and over 144°F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.
- Thoroughly wash vehicle free of dust, sand, and dirt.
- Use lubricate such as Shine Mist, Optimum No Rinse, Glide, etc.
- Spray sufficient lubricate onto the surface evenly.
- Polish the surface with dual action orbital polisher or by hand using the velcro strap (sold seperately) using light pressure (Low Speed).
- Wipe off residue with clean dry microfiber towel.
NOTE: Using with 6” soft-edge DA pad is highly recommended.
Sufficient lubrication is crucial to the AUTOSCRUB application.
Plain water is NOT an adequate lubricant.
DO NOT use with rotary polisher.
AUTOSCRUB is not solvent resistant.
Remove tar & grease before application
Helpful Tips:
The AUTOSCRUB has a protective coating to ensure stability within transportation.
To break in the pad, moisten the AUTOSCRUB with desired lubricant.
Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam; this is the protective sealant coming off.
Don’t use until the polymerized rubber is soft and slightly tacky.
Cold temperatures may stiffen pad. Warm surface before using.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.