Snappy Clean Boost™ Pad Cleaning Powder. Specially formulated to clean, condition, and extend pad life.
Simply fill the System 3000D Pad washer to the desired level with clean water, add one packet of Snappy-Clean BoostTM powder, open the covers and insert the soiled pad attached to the polisher. Then run the polisher while pressing repeatedly on the wash plate. The pressing action will activate the pump and draw the cleaning solution from the bottom of the pail into the pad. Use the power of the polisher to agitate and clean the pad and to control the amount of solution brought into the pad. The dirty solution and contaminants will drain into the catch basin where it can be filtered and reused or discarded when the basin is full. Spin-dry the pad inside the unit to complete the cleaning cycle.